Dynapac CA1500PD

SAVE FUEL WITH ECO MODE

With ECO Mode enabled, the engine rpm is adjusted to be as low as possible while still maintaining the necessary power required for the given compaction parameters, in order to sustain compaction efficiency.

SAVE EVEN MORE FUEL WITH SEISMIC

Seismic automatically detects the natural frequency of the soil, and continuously adjusts to the frequency of drum system, resulting in up to 30% reduction of the required number of passes and additionally up to 35% reduction of fuel consumption compared to traditional compaction with fixed or manually adjusted frequency settings. In total these saving parameters will sum up to an expected saving of up to 55% less fuel required to complete the job.

CONTINUOUS JOBSITE MANAGEMENT

Dyn@Lyzer continuously measures the stiffness of the compacted area and records the number of passes. This data is constantly visible for the operator on the machine and can also be monitored from the office.

MANAGE YOUR FLEET WITH DYN@LINK

Increase the profitability of your business by using Dyn@Link. Quickly identify underperforming equipment, maximise uptime with perfectly scheduled maintenance and in case of a breakdown get machines operating again as quickly as possible.

ACTIVATE BOUNCING CONTROL

Active Bouncing Control (ABC) alerts the operator and automatically lowers the amplitude settings if the machine begins bouncing, which reduces the risk of destroying the achieved level of compaction.

OPTIMISE COMPACTION WITH SEISMIC

Seismic automatically detects the natural frequency of the soil, and continuously adjusts to the frequency of drum system, resulting in up to 30% reduction of the required number of passes compared to traditional compaction with manually adjusted frequency settings.

PHENOMENAL GRADEABILITY

With Dynapac’s High Climb traction system, the machine can achieve 55% gradeability in both froward and reverse, which is ideal for compaction in trenches.

SUPERIOR SERVICEABILITY

The cross-mounted engine at the rear offers excellent access to all routine service and maintenance points. The hydraulic pumps are in line with the engine andfully accessible for servicing from ground level. Additionally, all filters and fluids and be changed and refilled from the ground as well.

CONFIGURE YOUR DRUM TO YOUR NEEDS

Depending on the jobsite requirements and material that is being compacted, you are able to choose between either smooth or padfoot drums. Versatility can be increase with padfoot shells kits to be use interchangeably with a smooth drum machine.

ERGONOMIC SWIVELING OPERATOR’S STATION

The adjustable operator’s station swivels together as a complete unit to maintain ergonomics even when turning around, by never having steering wheel and instrumentation behind you while providing the operator a perfect view over both working area and their surroundings by not having any structures blocking the vital site lines to control during operation. The sloping engine hood combined with the ability to see the front beam from operator’s station makes it easy to keep control of the machine. This visibility can be further enhanced with optional work lights and back-up camera.

EFFICIENCY ECCENTRICS

Dynapac’s patented eccentric system reduces energy consumption required to initiate vibration, thus decreasing fuel consumption, and limiting wear and tear.

MASSES

• Operating mass (incl. ROPS): 7150 kg
• Operating mass (incl. Cab): 7300 kg
• Module mass (front/rear): 3700 kg / 3600 kg
• Max. operating mass: 7700 kg

TRACTION

• Speed range: 0-12 km/h
• Tyre size (8 ply): 14.9 x 24 TL
• Theor. gradeability: 55 %
• Vertical oscillation: ±9°
• Number of pads: 132
• Pad area: 84 cm2
• Pad height: 76 mm

COMPACTION

• Nominal amplitude (high/low): 1.8 mm/ 0.8 mm
• Vibration frequency (high/low amplitude): 32 Hz/ 36 Hz
• Centrifugal force (high/low amplitude): 133 kN/ 72 kN

• A. Wheelbase 2690 mm.
• B1 Width,front 1866 mm.
• D. Drum diameter 1219 mm.
• H. Height, with ROPS/cab 2730 mm.
• K1. Ground clearance 330 mm.
• K2. Curb clearance 360 mm.
• L. Length 5280 mm.
• O1. Overhang, right 95 mm
• O2. Overhang, left 95 mm.
• P. Pad height 76 mm. R1.
• Turning radius, outside 4800 mm.
• R2. Turning radius, inside 3100 mm.
• S. Drum shell thickness 17 mm.
• W. Drum width 1676 mm.
• α. Steering angle ±38°.